Engineering solution
Ancillary Work for the Test Bench
Ancillary Work
Our group collaborates with third‑party partners to provide proposals for various auxiliary equipment related to your test‑bench facilities.
main auxiliary systems and equipment we can propose include:
✔Cooling systems (cooling towers, water tanks)
✔Oil–water separation tanks
✔Silencer systems
✔Base plates
✔Temperature‑control units
✔Radiators
✔Other related auxiliary equipment
Cooling system
Scope of the project
✔Selection of cooling system
✔Selection of underground water tanks
✔Heat load calculation
Base plate
Scope of the project
✔Installation of the dynamometer on the base plate
✔Alignment adjustment between the dynamometer and the base plate
Coolant temperature‑control unit
Main specifications
| Engine power | 2200kW |
|---|---|
| Cooling Capacity | 2200kW |
| Rated Control Range | 50℃〜110℃ |
| Cooling‑Water Flow Rate | 162m³/h |
| Max pressure | 6.0bar |
| Interface | EtherCAT |
| Dimension (WHD) | 3500×2500×1000mm |
Fuel temperature‑control unit
Main specifications
| Engine power | 4300kW |
|---|---|
| Fuel | Diesel |
| Cooling Capacity | 35kw |
| Rated Control Range | 60℃ |
| Fuel Flow Rate | 30L/min (6bar) |
| Control Accuracy | ±0.3℃ |
| Interface | EtherCAT |
| Supply Temperature Range | 20℃～30℃ |
| Dimension (WHD) | 1800×2250×450mm |
Charge –air intercooler
Main specifications
| Heat dissipation | 270kW |
|---|---|
| Air / Flow rate | 5600kg/h |
| Charge‑Air Temperature Downstream of the Compressor |
260℃ |
| Charge‑Air Temperature Upstream of the Engine Intake (Control Temperature) |
50℃（Max 65℃） |
| Control Accuracy | ±2℃ |
| Maximum Cooling‑Water Flow Rate | 30㎥/h |
| Max pressure | bar |